drone flight controllers

in this present post, we have comprehensively listed the drone flight controllers (the cost of which does not exceed $500). We regularly update this list with models produced by the market leaders. All items in our database are selected by our editors and updated on a regular basis.

The list of the top 15 drone flight controllers is given on this page will absolutely help you to grab your perfect match. Without spending much time, let’s start with reviews right now!

If you want a drone flight controllers that has all the basic features, this top list should be your best bet. It comes with an average rating of 4 stars after more than 1200+ customer reviews and it’s one our most popular items in recent times!

If you’re looking for the drone flight controllers available, look no further than this list! We’ve compiled 15 of our favorite options to help make your decision easier. If there’s something specific that is on your mind or just need some advice then keep reading below:

Top 15 List of drone flight controllers is given below

Finding the drone flight controllers is very important for them to get fit. To help you find the right one, we analyzed the best-selling products on Amazon and other online retailers. We took into consideration several factors, which include ease of use, durability, weight capacity, and how much space is available in your home.

We’ve consulted top experts who have in-and-out knowledge about the drone flight controllers. We chose a product with amazing features you haven’t heard of before, so we could provide your shopping experience with some variety! Our team filtered more than 100+ items to get this list done just right for ya.

1
SpeedyBee V3 F7 Flight Controller Stack: 30x30 Drone FC Stack with 4in1 50A ESC BL32, Wireless Betaflight Configuration, Blackbox,Solder-Free Plugs,WiFi,Bluetooth for 3-6S 4" 5" FPV Drone Cinelifter
  • [Wireless FC ESC Tuning]: 33% faster wireless data transfer than the last version. Update FC firmware wirelessly in just 1 minute! Connect via Bluetooth and fully configure any setting for Betaflight/Emuflight/INAV.
  • [Solder-free Installation]: Come with two installation methods,one side has plugs port for your digital video transmitter, receiver, camera, VTX, and GPS,4x LED plugs. Another side for soldering by yourself.
  • [50A 4-in-1 Upgraded ESC]: Real 50A output, Up to128KHz PWM, CNC heat sink,1500uF Low ESR capacitor, TVS protective diode,Change Motor Direction Wirelessly.
  • [Get Blackbox Data in 1 Minute]: With an optimized Bluetooth/WiFi chip, you just need to take your smartphone out, connect, and download your flight in 20 seconds.Come with 500MB super huge onboard Blackbox flash memory.
  • [More Features& Warranty]:Support up to 8 motors,Built-in 4 x LED plugs,Onboard 4-level battery life indicators. Feel free to contact us for help by scanning the QR code,or get help on Speedybee APP.
2
SpeedyBee Mini F7 Flight Controller 3-6S 20x20mm Built-in Bluetooth Drone Stack Support Wireless Tuning for 2-4 Inch FPV Drone
  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer.
  • Wireless FC ESC Tuning: Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly.
  • Support Digital And Analog Fpv System: The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista.
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app.
  • What You Get: SpeedyBeeF7MiniFlightController, Manual Card
Sale3
40pcs FPV Flight Controller Vibration Dampener, M3 Rubber Damper Balls Anti-Vibration Spacer Balls for RC F4 F7 Drone Flight Controller Stack
  • High quality soft mount Spacer Balls for FPV flight controller, make your quadcopter more stable.
  • Convenient stack spacers for you to build your flight controller stack
  • Easy to install, perfect fit, and significant vibration elimination.
  • Made of high quality rubber for lasting performance
  • Clean and functional dampener, great solution to any flight controller vibration.
4
SpeedyBee F7 Mini Flight Controller Stack 3-6S 20x20mm Built-in Bluetooth Drone Stack with 35A BLHeli_S 4 in 1 ESC Support Wireless Tuning for 2-4 Inch FPV Drone
  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer.
  • Wireless FC ESC Tuning- Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly.
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app.
  • Support Digital And Analog Fpv System- The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista.
  • Real 35A BLHeli_S ESC- 6-layer 2oz PCB plus optimized circuit design equals stable and strong current output. The four-channel continuous 140A output can reach 30 seconds.
5
DJI Mavic Air 2 Fly More Combo with DJI Smart Controller - Drone Quadcopter UAV with 48MP Camera 4K Video 1/2"" CMOS Sensor 3-Axis Gimbal 34min Flight Time ActiveTrack 3.0, Gray
  • UP YOUR GAME : The Mavic Air 2 camera drone takes power and portability to the next level. It combines a powerful camera with intelligent shooting modes for stunning results. Push your imagination to its limits because aerial photography has never been this easy.
  • NEXT-LEVEL CONTENT : Capture impressive 48MP photos with a 1/2-inch CMOS sensor while the 3-axis gimbal provides 4K/60fps video. The secret to incredible HDR video is a high-performance Quad Bayer image sensor.
  • IMPROVED FLIGHT : An impressive flight time of up to 34 minutes allows you to pull off epic, fast-paced shots. Obstacle sensing in three directions makes it extra convenient for beginners and improves safety for your Mavic Air 2.
  • INTELLIGENT TRACKING : Mavic Air 2 features intuitive shooting functions that make aerial photography easier than ever. Spotlight 2.0 keeps the camera locked on a subject while you fly freely. ActiveTrack 3.0 keeps subjects centered. POI 3.0 tracks moving subjects like people and vehicles.
  • APP COMPATIBILITY : The DJI Fly app requires iOS v10.0, Android v6.0, or above. Compatible devices include: iPhone (11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, 6s Plus, 6s, 6 Plus, 6), iPad Pro (9.7’’), iPad Air 2 (9.7’’), iPad mini 4 (8’’), iPad Pro (10.5’’), iPad Pro 2018 11’’, iPad Pro 12.9’’, Samsung Galaxy (S20, S10+, S10, S9+, S9, S8+, S8, S7 edge, S7, S6, Note10+, Note9, Note8), Huawei (P30 Pro, P30, P20, P10, Mate 30 Pro, Mate 20 Pro, Mate 10, nova 5, nova 4, nova 3e, nova 2, Honor 8X, 10, 9, 20 Pro, Magic 2, Mi 8, MIX 2S, MIX 2, Redmi Note 5, Oppo Find X, R15, Vivo NEX, X27, X21, X20A, OnePlus 7, 6T, 5, Pixel 3 XL, 2 XL, 2, LG V20, LG G6, Sony Xpeial 1.
6
QWinOut Power Module Current Module Female Male Plug with 5.3V DC BEC for APM 2.8 PIXHAWK Flight Controller APM2.6 2.5 2.52 RC DIY Drone Accessories
  • The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.
  • The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
  • Max input voltage: 25V
  • For APM 2.5 2.6 2.8 PIX PIXHAWK
  • Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is notdesigned to power servos. Use your aircraft's own ESC/BEC for that.
7
BETAFPV F4 1S Brushed Flight Controller with SPI Frsky D8 Receiver Support OSD Customized RGB Lights with 55mm BT2.0 Connector Power Cable Compatible for 1S Brushed Drone like Beta65S
  • 【Upgrade】Classical BETAFPV F4 1S brushed flight controller V2.0 comes back with a new cross particular shape, and it adopts BT2.0 connector cable instead of BT2.0. It is compatible with Beta65S 1S brushed whoop drone.
  • 【Protocol】Build-in CC2500 chip, the default protocol is configured to Frsky D8 out of the factory and can be adjusted to  Frsky D16 FCC, Frsky D16 LBT, or Futaba. Pilots could set up the protocol according to their needs in Betaflight Configurator.
  • 【Cable】The power cable applies BT2.0 connector instead of PH2.0, which solves the problem of voltage sag, and the discharge can be more efficient, bringing this board a better performance on function for power and responsiveness.
  • 【RGB】It supports custom RGB lights on the Betaflight configuration, you can DIY it by your hobby, which makes your drone unique from others.
  • 【Support】Firmware and Cli Dump file for F4 Brushed Flight Controller, some basic guidance and typical FAQ, please visit our official website.
8
DGZZI 20pcs M3 Damping Ball for FPV F4 Flight Controller Anti Vibration Damper Washer RC Models DIY Part M3 Mounting Hole Shock Absorption Suspension Balls Black
  • Type: Damping Ball For Flight Controller
  • Color: Black, Mounting Hole: M3, Height: 4.5mm
  • Material: Made of high quality soft plastic, good toughness, perfect damping result.
  • Function: Effectively reduce the sensitiveness of flight control, make flight more stable and carefree.
  • Fit for: Newest F4 and F7 32bt controller RC multirotors.
9
Matek F405-MiniTE Flight Controller Built in OSD Baro Blackbox F405 STM32F405RGT6 ArduPilot INAV BetaFlight for RC FPV Racing Drone …
  • Matek Flight Controller F405-MiniTE : Upgraded Flight Controller,it is designed specially for fixed wing.
    F405 has 1MB flash which can run with ArduPilot.
  • Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
  • Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX.
  • F405-miniTE support 8motors+3servos in INAV/BF multirotor mixer.
  • MCU: STM32F405RGT6 , IMU: ICM42605 , Baro: Goertek SPL06-001 (I2C) , OSD: AT7456E, DJI OSD ,
    Blackbox: 16M-byte Flash memory
10
Matek Systems F411-WTE 100MHz STM32F411CEU6 Flight Controller Built-in OSD 2-6S for RC Airplane Fixed Wing DIY Accessories Parts …
  • Product Name: Matek F411-WTE Flight Controller,STM32F411CEU6 OSD 2-6S Lipo
  • IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial
  • 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power)
  • Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g
  • INAV Target: MATEKF411TE ( INAV4.1 or newer)
11
FPV Flight Controller Vibration Dampener, M2 O-Ring Anti-Vibration Spacer Balls for RC F4 F7 Drone Flight Controller Stack, 40pcs
  • High quality O-Ring soft mount for FPV flight controller, make your quadcopter more stable.
  • Convenient stack spacers for you to build your flight controller stack
  • Easy to install, perfect fit, and significant vibration elimination.
  • Made of high quality rubber for lasting performance
  • Clean and functional dampener, great solution to any flight controller vibration.
12
Aocoda-RC F7 Mini Flight Controller 20x20mm Stack Mounting 3-6S Lipo OSD Barometer 16Mb Blackbox for FPV Quadcopter Drones
  • Aocoda-RC F7 mini Flight Controller Board : fits for FPV Quadcopter Drones
  • Main control chip: STM32F722RET6,MPU: MPU6500,Barometer: BMP280
  • Input voltage: 3-6S Lipo;Power output: 5V/2.5A, 9V/3A
  • >PCB size: 28x28mm, mounting hole 20mm;20x20mm Mounting
  • Firmware: inav_3.0.2_AOCODARCF722MINI
13
iRCMATRC Stretchy Soft M3 Rubber Damper Balls Anti-Vibration Washer Damping Spacer for F4 F7 FPV Racing Flight Controllers RC Drone Accessories (60pcs) (Mix Color (Black, Blue and Purple))
  • Made of high quality rubber for lasting performance nice and soft and stretchy.
  • It fits for latest F4 F7 flight controllers which are with M3 assembling holes.
  • It is made of high quality rubber, color: blue, purple, black, weight: around 8g/pack.
  • Have these rubber spacers to take out vibrations and provide flexibility to the electronics.
  • Note: Not suitable for F4 with OSD 8K Flight Controllers.
15
brogtrol M3 Anti-Vibration Fixed Screws Mounting Hardware Spacer Standoff for FPV Drone Flight Controller 20Pack
  • 1.High quality flight controller anti-vibration fixed screw, makes flight more stable and worry-free
  • 2.Material: Rubber and Ultra Hard and Durable Alloy Steel and brass
  • 3.The anti-vibration fixed screws make your quadcopter more stable,good solution to deal with flight controller vibration woes
  • 4.This M3 rubber standoffs is easy to install, perfect fit, and significant vibration elimination
  • 5.Compatible With:QAV250 QAV-R 220 Flight Controller For Naze32 CC3D F3 PDB PCB Power Distribution Board.

If you’re looking for drone flight controllers that won’t let you down, we have the solution for you. Regularly, we update our selection of products so that it reflects what matters most and is tailored to meet your individual needs.

The products are selected by expert reviewers. The expert reviewers have tested them in conditions catered towards your specific requirements as well. The reviews are open to the public, so you can trust that they know what they’re talking about when it comes to picking a new software solution!

For a supplier of high-quality drone flight controllers for your product, we have the perfect solution for you. Each product on our list is regularly updated so that it features only what’s important and is tailored to meet individual requirements – just let us know how much information or feedback you would like!