in this present post, we have comprehensively listed the blower fan for 3d printers (the cost of which does not exceed $500). We regularly update this list with models produced by the market leaders. All items in our database are selected by our editors and updated on a regular basis.
The list of the top 15 blower fan for 3d printers is given on this page will absolutely help you to grab your perfect match. Without spending much time, let’s start with reviews right now!
If you want a blower fan for 3d printers that has all the basic features, this top list should be your best bet. It comes with an average rating of 4 stars after more than 1200+ customer reviews and it’s one of our most popular items in recent times!
If you’re looking for the blower fan for 3d printers available, look no further than this list! We’ve compiled 15 of our favorite options to help make your decision easier. If there’s something specific that is on your mind or just need some advice then keep reading below:
Top 15 List of blower fan for 3d printers is given below
Finding the blower fan for 3d printers is very important for them to get fit. To help you find the right one, we analyzed the best-selling products on Amazon and other online retailers. We took into consideration several factors, which include ease of use, durability, weight capacity, and how much space is available in your home.
We’ve consulted top experts who have in-and-out knowledge about the blower fan for 3d printers. We chose a product with amazing features you haven’t heard of before, so we could provide your shopping experience with some variety! Our team filtered more than 100+ items to get this list done just right for ya.
- ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
- ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- ✔️WINSINN 40mm blower fan 24V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.09A, Power: 0.96W, Speed: 6500PRM, Air Pressure: 8.34mmH₂O, Airflow: 3.5CFM, Noise: 33.4dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Blower Fan - 24v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm
- ✔️WINSINN 5015 blower fan 12V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.15A, Power: 1.8W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
- ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- 【WIDELY USED】30mm blower fan, Designed for cooling or ventilation of 3d printer, helmet, airsoft goggles, LED Lighting, humidifier, memory modules, etc. or as a replacement fan
- 【PARAMETER】Square - 30mm L x 30mm W x10mm H | Rated Voltage: 24V DC | Current: 0.06 Amp | Power: 1 Watt | Airflow: 1.75 CFM | Noise: 28.3 dBA | Speed: 9000RPM
- 【POWER CONNECTION】XH2.54-2Pin fan connector with 150mm (5.91 in) cable (Red + Positive, Black - Negative); Operating Voltage Range: 14 to 26V
- 【MICRO BLOWERS】 Smaller lightweight, only 0.28 oz, ideal for applications that have limited space; Sleeve Bearing work up to 35,000hrs at 25℃
- 【PACKAGE LIST】Includes 2 pieces 30x30x10mm 24V dc blower fan and mounting screw set; keep your system cool and extend the life
- Cooling Blower Fans; DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on---Repair Replacement (2Pack)
- Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM
- Total Size : 5 x 5 x 1.5cm /2" x 2" x 0.6 " (L*D*H); Outlet Size : 2 x1.5cm/0.8" x 0.6"(L*W) Cable Length : 25cm/9.8"; Mounting Spacing : 5.8cm/2.3";Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing; Sale price $14.99 Dual Ball Bearing.
- Type: 4pcs 5015 Brushless Turbo Blower Cooling Fan 3D Printer Parts Accessories, with 1m red and black 2 lead wire, easy to install.
- Size: 50x50x15mm. Air Inlet Size: 31mm. Air Outlet Size: 20x15mm. Rated Voltage: DC 12V. Rated Current: 0.18A. Speed: 6500 +/- 10% RPM. Bearing: Sleeve Bearing. Noise: 25dBA
- Material: Made of high quality plastic, fine workmanship, environmental protection, safety, harmless.
- Function: Perfect for cooling hot ends, extruder, prints, and other parts need heat sink on 3D printer.
- Feature: High precision sleeve bearing, ultra quiet DC blower with high-speed rotation, long life and low noise.
- ✹✹ Power Connection: 2 Pin-ph2.5; Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50*50*15mm(L*D*H), Speed:5700±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Package Included: 4PCS * 5015 mini fan.(✹✹Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. ✹✹Any questions, you can contact us and we will give you a satisfied solution!).
- ✔️WINSINN 40mm blower fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3、Ender-3 Pro、Ender-3S、Ender-3 v2、Ender-3 Max、Ender-5、Ender-5s、Ender-5 Pro、 Ender—5 Plus、Ender_6、CR-5 Pro H、CR-X、CR-X Pro、CR-6 SE、CR-6 Max、CR-30 (Installation Position for Nozzle)
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.07A, Power: 1.68W, Speed: 5400PRM, Air Pressure: 6.68mmH₂O, Airflow: 1.6CFM, Noise: 31dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Blower Fan 24v - Dual Ball Bearing & Air Guide Parts, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
- It's 100% Creality Original
- Use For: Creality Ender-3/Ender-3 pro/Ender-5
- Operation Voltage: DC 24V
- 40x40x10MM
- Rated Voltage: DC 24V, 4010 Fans 40x40x10MM
- The blower fan is used to dissipate heat from the print platform model, and the axial fan is used to dissipate the nozzle kit
- This 24V 4010 cooling fan compatible with Ender 3, Ender 3X, Ender 3 Pro
- 24V turbo circle brushless cooling fan can provide with large air flow,low noise; long span life; good running stability and corrosion resistance
- Package included: DC 24V Extruder Hot End 4010 Fan and DC 24V Turbo Circle fan
- ✔️WINSINN 40mm blower fan 24V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.09A, Power: 0.96W, Speed: 6500PRM, Air Pressure: 8.34mmH₂O, Airflow: 3.5CFM, Noise: 33.4dBA
- ✔️Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation.
- Super ventilation, super wind pressure, cooling effect is remarkable.
- The Silent fan features a completely redesigned fan design and is optimized for high static pressure.
- Incoming PBT anti-plastic material, environmental protection fire, no deformation at high temperature.
- Chips imported with Taiwan, low power consumption, can perform PWM function.
- Environmental protection, safe, harmless.
- Please note that the fan consists of two parts. Both could not be replaced by fans from other manufacturers.3D Printer 24V 5015 Blower Fan Radial Cooling Fan 2PCS
- Revolution: 6500±10%RPM / Current Rating: 0.18A Noise: 25dBA
- Each fan divided into two parts, cable length: 20cm+100cm.
- When one part of the fan is broken, you can just replace it, no necessary to disassemble the whole parts.
- Widely used in 3D Printer, Humidifier, Aromatherapy, pc cpu server cooling dissipation and other small appliances series repair replacement.
- ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products.
- ✔️Packing List: 2 x 50mm Blower Fan 24v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
- ☀☀ Power Connection: 2 Pin-ph2.5; Cable length is 30cm/11.8in. Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
- ☀☀ Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
If you’re looking for blower fan for 3d printers that won’t let you down, we have the solution for you. Regularly, we update our selection of products so that it reflects what matters most and is tailored to meet your individual needs.
The products are selected by expert reviewers. The expert reviewers have tested them in conditions catered towards your specific requirements as well. The reviews are open to the public, so you can trust that they know what they’re talking about when it comes to picking a new software solution!
For a supplier of high-quality blower fan for 3d printers for your product, we have the perfect solution for you. Each product on our list is regularly updated so that it features only what’s important and is tailored to meet individual requirements – just let us know how much information or feedback you would like!